The growing consumption of bottled drinking water in Iraq has increased the need to evaluate the quality of products available in local markets. This study assessed physicochemical characteristics of ten locally marketed bottled-water brands purchased in Al-Samawah in April 2026 and compared laboratory findings with the limits reproduced from Iraqi and international sources and with values declared on product labels. The measured indicators included pH, total dissolved solids (TDS), turbidity, total hardness, calcium, magnesium, sodium, potassium, nitrate, sulfate, and chloride. According to the principal analytical table, pH ranged from 6.3 to 7.5, TDS from 22 to 269 mg/L, turbidity from 0 to 1.55 NTU, and total hardness from 64 to 240 mg/L as calcium carbonate. Calcium concentrations ranged from 9 to 51 mg/L, magnesium from 9.8 to 35 mg/L, sodium from 2 to 50 mg/L, and potassium from 0 to 1 mg/L. The reported nitrate, sulfate, and chloride ranges were 0–0.9, 8–30, and 8.9–76 mg/L, respectively. Sample W2 had a pH of 6.3, below the study’s stated Iraqi comparison range of 6.5–8.5, while sample W1 had the highest recorded turbidity, 1.55 NTU. Product-label comparisons indicated substantial discrepancies in several declared mineral concentrations. However, some analytical values differ between the two original data tables and require verification against laboratory records before definitive brand-level conclusions are drawn. Because microbiological contaminants and toxic trace substances were not assessed, the results characterize selected physicochemical indicators and cannot establish comprehensive drinking-water safety. The study highlights the need for standardized quality assurance, accurate labeling, replicated sampling, and complementary microbiological surveillance.